New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Houston pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Installation Across Dickinson
Replacing a door in Dickinson isn’t a generic job, and if you’ve lived here through even one hurricane season, you already know why. Our crews work in Dickinson weekly, and we understand what Galveston County wind codes demand from every entry door, storm door, and slider we set. Whether you’re off FM 517 near Bay Colony or in a 1970s ranch off Hughes Road, we show up in the window we give, hand you a written price before any work starts, and leave the job site cleaner than we found it. Call (325) 326-4211 for a free estimate, and a real person answers, day or night.
Why Westlight Windows Houston Is Dickinson’s Preferred Door Installation Company
We’ve been installing doors since 2009 as an independently owned and operated Kingswell location, and Dickinson homeowners keep calling us back for one reason: we put every promise in writing before a single screw turns. The Kingswell Guarantee means you get a written price, a committed arrival window, a clean job site, and a written guarantee on the completed work, on every single project. If a repair fails within the guarantee period, we come back and fix it at no charge. No negotiating, no fine print. That’s the Kingswell Way, and it’s how Owen Satterfield runs every job with our Door Installation team.
Background-checked, uniformed technicians handle every Dickinson job, so when the doorbell rings, you know exactly who’s walking through it. Our phone lines are staffed by a live person 24 hours a day, 7 days a week, not a voicemail box. And we carry eight manufacturer lines, including Therma-Tru, Mr-Glass, and ECO Window Systems, so we match the right product to your home’s existing framing and wind rating instead of forcing one brand into an opening it doesn’t fit.
Storm Door Installation in Dickinson
Storm Door Installation in Dickinson usually runs $450 – $1,100 installed, depending on whether the existing frame can be reused or needs a full replacement with new flashing and sill pan. The first thing we check is how the old storm door was hung. In older Dickinson homes, we regularly find storm doors screwed into brick veneer with no backer plate, and the frame has been pulling away from the brick for years. We pull it, inspect the sheathing behind it for moisture damage, and set the new door plumb against a properly flashed opening so it doesn’t warp in the first hot, humid summer.
When your storm door frame is pulling away
A storm door added in the 1990s on a Dickinson brick home often lacks a proper sill pan. Water runs down the brick, behind the threshold, and into the subfloor. We remove the old unit, repair any rot we find, and install a new storm door with an integrated sill pan and backer rods so water drains away from the house instead of through it.
Impact-rated storm doors for TWIA compliance
If your storm door faces the Gulf side of Dickinson, a standard aluminum unit may not meet TWIA wind-borne debris requirements. We’ll tell you straight whether your specific opening needs a large-missile-rated assembly. Written price first, always.
Sliding Glass Door Installation in Dickinson
Sliding Glass Door Installation in Dickinson typically runs $1,400 – $2,900 for a standard 6-foot impact-rated unit, installed with new shims, flashing, and sill support. Many Dickinson homes built between 1960 and 1985 have non-standard rough openings, so a cheap drop-in slider racks, the rollers bind, and the door stops locking within a year. We shim every opening to the manufacturer’s tolerance and check the design pressure rating against your home’s wind zone before we order the slab.
Replacing a slider that won’t lock
A slider that won’t lock on a Dickinson home is usually a frame issue, not a hardware issue. The opening settled, the frame racked, and the latch no longer aligns. We pull the old unit, square the rough opening with treated shims, and set a new slider that locks from day one and keeps locking through storm season.
Matching the look of older sliders
We carry lines in finishes that match mid-century coastal styles, including bronze and white aluminum frames that read close to the original 1970s look. You get modern impact glazing and a locking mechanism that actually engages, without a glaring style mismatch on the back of the house.
Trusted Brands We Service in Dickinson
We install and service Therma-Tru entry doors, Mr-Glass sliding doors, ECO Window Systems exterior doors, and ViewLux storm doors in Dickinson. Because we maintain stock of common replacement parts and hardware for these lines, we can often turn around a Dickinson repair faster than a company that has to order a hinge or threshold from a distributor every time. If your existing door is one of these brands, we’ll service it. If it’s not, we’ll give you an honest read on whether repair makes sense or replacement is the better call. Owen Satterfield insists on it: truth first, then a written number.
Common Door Installation Problems We See in Dickinson Homes
- Permit-proof door swaps. A handyman replaces a front door without pulling a permit, and the new assembly doesn’t meet TWIA wind-borne debris rules. Years later, a storm claim gets denied because the door was never certified. We pull the permit, set the rated assembly, and close the permit on the first pass.
- New impact doors on 1960s jambs. The original jamb has no structural tie to the rough opening, so under negative design pressure, the door blows inward. We reframe the rough opening and anchor the jamb properly before we ever set the slab.
- Racked sliders from non-standard openings. Dickinson’s mid-century rough openings were framed by hand, and no two are identical. A slider dropped in without shimming racks within a season. We shim, square, and seal every opening.
- Warped wood frames from humidity. Dickinson’s summer humidity and Gulf air warp hollow-core doors and pine frames faster than almost anywhere in Texas. We install composite and fiberglass frames that don’t move when the dew point climbs.
Pricing for Door Installation in Dickinson, TX
Here’s what Dickinson homeowners can expect to pay. A slab-only replacement with a new jamb typically runs $700 – $1,400 installed. A full entry door replacement with impact-rated glass and a new sill pan runs $1,900 – $3,800 depending on the brand and wind rating. Storm doors run $450 – $1,100, and sliding glass doors run $1,400 – $2,900. The biggest cost driver in Dickinson is TWIA compliance: if your opening needs a large-missile-rated assembly, that’s a real cost difference from a standard insulated door. You’ll see the exact number, in writing, before work starts. Call (325) 326-4211 to schedule your free estimate, and we’ll walk the job with you and price it line by line.
We Also Serve Cities Near Dickinson
Our Door Installation in Dickinson crews also cover Santa Fe, Friendswood, Deer Park, and Pasadena. If you’re just over the line in League City or thinking about a project in Friendswood, call us and we’ll schedule the same week. One number, live person, real arrival window.
Serving Dickinson, TX - Our Local Coverage Area
We’re based in the Dickinson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Installation in Dickinson
Yes, a front door replacement in Dickinson requires a permit, and because the city sits inside the TWIA designated catastrophe area, the inspector will require a large-missile-rated assembly if your home’s wind zone calls for it. That means the door itself, the glass, and the anchoring system all have to meet a specific design pressure rating. We pull the permit, set the rated assembly, and close it out. Call (325) 326-4211 and we’ll check your home’s specific wind zone before we quote anything.
Yes, we can match the look of a 1970s slider more closely than you’d expect. We carry bronze and white aluminum frames that read close to the original mid-century coastal style, but with modern impact glazing and a lock that actually engages. The key is shimming the non-standard rough opening correctly, which is what keeps the new slider from racking. Call (325) 326-4211 for a free estimate.
Design pressure, or DP, is the wind load a door assembly can handle before it fails, usually measured in pounds per square foot. Dickinson homes in the TWIA zone typically need a DP rating of 50 or higher for wind-borne debris protection, depending on the exact location and exposure. We’ll determine your required rating during the free estimate and quote only doors that meet it. Call (325) 326-4211 and ask for Owen’s team.
Yes, in Dickinson it will. A hollow-core door has almost no insulation value, and in a humid subtropical climate, the front door is a direct path for heat gain and air leakage. An insulated Therma-Tru or ECO Window Systems door with proper weatherstripping and a thermal break frame cuts that transfer substantially. You’ll feel the difference in the front hallway by August. Call (325) 326-4211 to price one for your home.
Yes, and we start by removing the old door and inspecting the sheathing and framing behind it. In Dickinson brick homes, the usual cause is a missing sill pan and no backer plate, so water has been running behind the brick and rotting the subfloor. We repair the opening, set a new storm door with proper flashing, and guarantee the work in writing. Call (325) 326-4211 for a free estimate.
What a Dickinson Door Permit Actually Forces You to Fix
Here’s the piece nobody tells you until the old jamb is already in the dumpster. Dickinson sits inside the TWIA designated catastrophe area, and that means a door installation that triggers a permit often requires a large-missile-rated assembly. That requirement doesn’t apply to most homes just 20 miles inland in League City or Friendswood. When you pull a door permit here, the inspector isn’t just checking the swing and the lock. They’re checking the anchoring, the glass, the frame-to-rough-opening connection, and sometimes the condition of the wall behind the casing. This is the single biggest reason a Dickinson door quote moves, and it’s exactly why we inspect first, write allowances into the contract, and price any surprise in writing and get your approval before we touch it. No change order after the fact. That’s the Kingswell Way.
A Field Vignette From Pine Drive
In the Pine Drive subdivision, we opened a 1970s front entry to replace a warped hollow-core door and found the original jamb had been shimmed with scrap lumber and never flashed. Water had been wicking into the subfloor for decades, and the framing behind the casing was soft to the touch. We reframed the rough opening, set a Therma-Tru slab with a laminated glass interlayer, and sealed every gap before the inspector arrived, so the permit closed on the first pass. That’s the kind of thing you can’t see from the outside, and it’s why a $1,200 door swap sometimes needs $2,000 of framing work you didn’t know was there. We’ll always show you what we found, in person, before we do the work. Written price first, always.
Call Owen’s Team in Dickinson Today
If your front door is warped, your slider won’t lock, or your storm door frame is pulling away from the brick, call (325) 326-4211. You’ll get a real person on the phone, a free estimate in Dickinson, and a written price before any work starts. Owen Satterfield has been running door installations this way since 2009, and the Kingswell Guarantee means the price, the arrival window, the clean job site, and the guarantee are all in writing. We’ll do it right, or we’ll come back and make it right at no charge.
Written by Owen Satterfield, Owner at Westlight Windows Houston, serving Dickinson and surrounding Galveston County communities since 2009.
Six Reasons Homeowners Choose Westlight Windows Houston
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.