New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Houston pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Impact Garage Doors: The Houston Owner’s Guide
If you own a Mr-Glass impact garage door in Houston and a panel, hinge, roller, or strut has failed, we stock replacement parts and install them throughout the metro area. A typical Mr-Glass impact garage door part replacement runs $180 to $640 installed depending on the part, and most swaps take under two hours once we’re on site. Most homeowners discover the failure the same way: the door starts grinding instead of gliding, a panel shows a crack that wasn’t there after last week’s storm, or the door hangs slightly cockeyed in the track. You notice it when you’re leaving for work and then spend the rest of the day wondering how bad it actually is.
Which Mr-Glass Models This Applies To
Mr-Glass builds impact-rated garage doors in a handful of series lines, and the part you need has to match the series, not just the door size. The most common Mr-Glass impact doors we see in Houston are the flush-panel impact line and the carriage-house impact line, both built around a reinforced aluminum frame with laminated impact glass inserts. The quickest way to identify your door is to check the inside edge of the top-right panel: Mr-Glass stamps a serial plate there with the series code and manufacturing date. If the plate is gone (sun and humidity in Houston eventually win that fight), measure the panel thickness. The impact line runs 1-3/4 inches thick; the non-impact line runs 1-3/8. That quarter-inch difference matters because impact-rated hardware, hinges, and struts are not interchangeable with the lighter line. For the Mr-Glass impact series specifically, we recommend OEM (original manufacturer) parts over aftermarket equivalents. The aftermarket rollers and hinges we’ve seen are generic and don’t account for the added panel weight, which means they wear out faster. On a door that already costs more than a standard Houston garage door, saving $30 on a non-OEM hinge rarely makes sense.
Signs Your Mr-Glass Impact Garage Doors Is Failing
- Grinding or squealing when the door moves. The rollers are worn flat or the hinges are binding. On impact doors this happens faster because the panels weigh more than standard panels, and Houston’s humidity accelerates roller bearing corrosion.
- The door hesitates or shudders partway up. This usually points to a failing strut or a stretched spring. An impact door that shudders is telling you the tension isn’t balanced, and ignoring it shortens the life of every other moving part.
- A visible crack or spiderweb pattern in a panel. Impact glass is laminated, so a crack often stays in place rather than shattering. That’s the laminate doing its job. But a cracked panel loses structural strength and should be replaced before the next hurricane-season wind test.
- The door sits uneven in the opening. One side hangs lower than the other. This is almost always a worn hinge or a broken cable, and running the door in this condition bends the track over time.
- You hear a loud bang and the door won’t budge. That’s a spring letting go. Do not try to move the door. The tension system on an impact door is heavy-duty, and a released spring under partial load is dangerous.
Replacement Cost & What’s Included
Here’s what Mr-Glass impact garage door part replacements run in Houston, installed:
- Roller and hinge set (all panels): $180 to $290
- Single impact panel replacement: $320 to $640 depending on panel width and glass configuration
- Reinforcement strut replacement: $140 to $260
- Spring replacement (pair, matched to door weight): $240 to $410
- Cable replacement (both sides): $130 to $220
The range comes down to panel width, series, and whether the hardware is standard or reinforced. Every quote includes the part, labor, and haul-away of the old part. You’ll get a written price before any work starts, and if the repair fails within our guarantee period, we come back and correct it at no charge. That’s the Kingswell Guarantee, and it applies to every Mr-Glass part we install.
DIY or Call Us?
There are a few things you can safely check yourself: look at the serial plate to confirm your series, note where the noise is coming from, and check for visible cracks or rust on the hardware. That’s genuinely useful information to have when you call. What you should not do is attempt to replace a spring, cable, or anything under tension. The springs on an impact-rated Mr-Glass door are under enough stored force to cause serious injury if they release while you’re working on them. Even the pros treat these with care. For anything else, the honest answer is that an impact garage door panel weighs enough that a two-person install is standard, and doing it wrong voids the door’s wind-load rating. If you’re not sure what you’re dealing with, call us at (325) 326-4211 and we’ll help you figure it out over the phone. No charge for the conversation.
FAQs
Rollers and hinges on Mr-Glass impact doors typically last 7 to 10 years in Houston, but coastal humidity and salt air can cut that to 5 or 6 years in places like Galveston or Clear Lake. Panels themselves should last 15 to 20 years unless they take a direct hit. Springs generally give you 8 to 12 years regardless of the door brand. If you’re past year seven on the original hardware, it’s a good time to have everything inspected. Call (325) 326-4211 and we’ll take a look, no obligation.
No. Impact-rated laminated glass cannot be repaired. The lamination holds the crack together, which is a safety feature, but the panel has lost its impact rating and needs to be replaced. We’ve tried every resin and fill product on the market, and none restore the structural rating. We’ll order the exact OEM panel for your series and have it installed as soon as it arrives. Call (325) 326-4211 for a firm written quote.
Most single-part replacements, like a roller set or a strut, take 45 minutes to two hours on site. A full panel replacement runs closer to two to three hours because the glass has to be handled carefully and the panel aligned precisely to the track. We’ll give you a specific window before we arrive, and we’ll call if anything changes. That’s how Owen runs every job, big or small.
We stock the most common Mr-Glass impact hardware on the truck: hinges, rollers, struts, and cables. Panels are ordered to match your series and size, which usually adds three to seven business days. That’s the tradeoff for getting an exact OEM match that keeps the door’s wind-load rating intact. If we’re on site and you need a stocked part, we can usually handle it the same visit. Call (325) 326-4211 and we’ll tell you what we can do today.
Written by Owen Satterfield, Owner, Westlight Windows Houston at Westlight Windows Houston, serving Houston and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Houston
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.