New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Houston pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Impact Garage Doors: The Houston Owner’s Guide
We stock and install CWS-compatible impact garage doors and replacement parts throughout Houston, with most complete door replacements running $1,850 to $4,200 installed depending on size, series, and reinforcement requirements. If you have a CWS impact door that’s binding, grinding, or refusing to close after years of Gulf Coast humidity and wind, we can typically match the part and have it functioning same week.
Most Houston homeowners discover a failing CWS part the hard way: a bang in the track during hurricane season, a door that suddenly weighs twice what it should, or a spring that lets go in the middle of a July afternoon when the garage is 110 degrees. The door almost never fails all at once. It gives warning signs for weeks or months first.
Which CWS Models This Applies To
We install and repair parts for CWS impact-rated garage doors across the residential series that are common in Houston: the standard wind-load rated models, the heavier impact-certified units, and the reinforced track systems paired with them. The critical distinction is whether your door carries a wind-load sticker (typically 130, 150, or 180 mph rating) or a full impact certification label. Those two categories use different bottom brackets, different roller stems, and different reinforcement plates, and ordering the wrong part wastes a week.
To identify your part, check the small metal or foil sticker on the inside edge of the door panel. It will show the series number and wind rating. If the sticker is gone, measure the panel thickness: most CWS impact doors are 2 inches thick, while their non-impact cousins run 1-3/8 inches. That alone tells us which parts catalog to pull from.
With CWS specifically, we’ve seen better long-term results using OEM parts for springs and hinges, while good aftermarket rollers and weatherstripping hold up just as well for less money. The springs are wound and tempered for a specific door weight, and CWS impact doors are heavier than standard doors of the same size. Aftermarket springs for a standard door will not hold the correct tension on an impact-rated panel.
We also stock compatible parts for PGT, CGI, and ES Windows impact doors, so if you have more than one brand on the property, one call covers it.
Signs Your CWS Impact Garage Door Is Failing
- The door jerks or shudders on the way up. This usually means one torsion spring has lost tension or broken, and the opener is dragging the full unbalanced weight of the door. The remaining spring is now carrying double its rated load and will fail soon.
- You hear a loud bang from the garage, like a car backfiring. A torsion spring snapped. The door will not open safely by motor or by hand, and the cable on that side is now slack and can whip free under the remaining tension.
- The door is crooked at the bottom or grazes the track on one side. A broken or stretched cable on one side is letting the panel ride uneven. Continuing to operate it bends the track, and then you’re replacing tracks, not just cables.
- Visible rust streaks run down from the rollers or the bottom bracket. Houston’s salty air and humidity attack roller bearings faster than inland climates. Once a roller seizes, it carves a groove into the track and the door starts binding at the same spot every cycle. Catching it at the streak stage saves the track.
- A sag in the center of the top panel when the door is closed. This means the reinforcement strut, the horizontal steel bar that gives an impact door its load rating, has worked loose or rusted through. That is not a cosmetic problem. The door has lost its rated wind resistance until it’s fixed.
Replacement Cost & What’s Included
In Houston, here’s what we charge for common CWS impact door repairs, parts and labor included:
- Broken torsion spring replacement (one spring): $285 – $385
- Broken torsion spring replacement (both springs, recommended): $425 – $560
- Broken cable or cable drum replacement: $180 – $260
- Roller replacement, full door (10 rollers): $220 – $310
- Bottom bracket replacement (impact-rated, per side): $160 – $240
- Full reinforcement strut replacement (installed): $195 – $285
- Complete CWS impact door replacement (single car, installed): $1,850 – $2,900
- Complete CWS impact door replacement (double car, installed): $2,800 – $4,200
The range comes from door weight, wind rating, and whether the track system is still square and reusable. What never changes: you get a written price before we touch the door, no revised invoice at the end, and our workmanship warranty on any repair we make. If a spring we install fails inside the warranty period, we come back and replace it. No charge, no negotiation, it’s in writing.
DIY or Call Us?
Let me be plain about the springs, because this is the one place a homeowner gets hurt. A CWS impact door weighs between 250 and 450 pounds, and the torsion springs that lift it are under enough tension to shatter bone. People have lost fingers and worse trying to wind or unwind a spring with improvised tools. If a spring or cable has failed, call us at (325) 326-4211. This is not a Saturday project.
What you can safely check yourself: photograph the sticker on the inside edge of the panel so we know the exact series, feel along the bottom of the door for rust on the brackets, and watch the door run one full cycle. Note where it hesitates or shudders. That information saves us time and you money. What you shouldn’t do is disconnect a cable under tension, back off a spring bolt, or try to lift a door that has lost a spring. The door will not cooperate, and neither will your back.
Owen Satterfield has been measuring, ordering, and installing windows and doors for close to two decades, and the rule he gives every tech is this: measure twice, quote straight, show up when we said we would. That applies to a $200 roller set and a $4,000 door the same way.
FAQs
With proper maintenance, a CWS impact garage door in Houston will typically last 15 to 20 years, but individual parts have shorter lifespans. Torsion springs are rated for about 10,000 cycles, which in a home used four times a day comes to roughly 7 years, and Houston’s humidity can shorten that by a year or two. Rollers and cables need attention every 5 to 7 years. The panel itself, if the reinforcement strut is intact and rust is caught early, is the longest-lived component. Call (325) 326-4211 and we can assess the condition of your door in one visit.
Some parts can, and some cannot. A worn roller, a stretched cable, or a surface-rusted bracket can often be repaired or replaced individually without touching the panel. A broken torsion spring is replaced, never repaired, and we recommend doing both springs at once because the other one has the same cycle count and will fail soon. A rusted-through reinforcement strut means the door’s impact rating is compromised, and that is a panel replacement concern, not a bracket swap. Call (325) 326-4211 and we’ll tell you which situation you’re in, free of charge.
Most single-part replacements, like a spring pair or a full roller set, take 60 to 90 minutes once we’re on site. A full door replacement is typically a half-day job, including removing the old door, checking the tracks, and testing the new door through several full cycles. We will give you a written arrival window before we start, and we keep it. Call (325) 326-4211 to schedule a specific time.
We keep the most common CWS impact door parts on our trucks: torsion springs in the common wind-load ratings, cables, drums, rollers, bottom brackets, and reinforcement struts. For unusual sizes or impact-certified hardware, we order from our supplier and typically have the part in Houston within 3 to 5 business days. We will tell you at the estimate whether your part is in stock or on order, before you agree to anything.
Get Your CWS Impact Door Fixed in Houston
If your CWS door is making noise, sitting crooked, or refusing to run smoothly, the cheapest fix is the one done before a small part becomes a full door replacement. Call (325) 326-4211, describe what you’re seeing, and we’ll get you on the schedule with a written price before any work begins. Every job comes with our 365-Day Done Right Promise: if the work isn’t right, we come back and fix it at no charge. The Kingswell Guarantee puts that in writing before we touch your door.
Written by Owen Satterfield, Owner, Westlight Windows Houston at Westlight Windows Houston, serving Houston and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Houston
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.